TWRP Recovery on Galaxy Tab 2 P3100/P3110 [EffortLess Guide]

Tutorial - How to Install Custom TWRP Touch Recovery on Samsung Galaxy Tab 2 7.0 P3100/P3110 using odin with step by step guide. You can download TWRP Recovery file from end of post. We also attach a video tutorial about Install TWRP Recovery on Galaxy Tab 2 via Odin. How To install Android 5.0 Lollipop on the Galaxy Tab 2

Pre-Requirement

Backup your device data.
Make sure your device have at least 40% battery power.
Already have USB Driver Installed for Galaxy Tab 2.
Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and device.

How to Install TWRP Touch Recovery on Galaxy Tab 2 7.0 P3100/P3110 Via Odin

Step 1. Download Odin v3.09 and GT-P3100_TWRP_2.8.1.1.tar.md5 file from end of post.

Step 2. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.

Step 3. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.

Step 4. Now, put the Galaxy Tab 2 in Download Mode by pressing and holding down the Volume Down button and the Power button together. A warning screen will come up; press Volume Up button to enter Download Mode.

Step 5. Now run Odin3 v3.09.exe as an Administrator.

Step 6. Now connect your device to your PC using USB cable. You will see an “Added!!” message in Odin’s message box. If you don’t get the same then you should try another USB port.. If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.

Step 7. Click the AP Button, and select that downloaded TWRP_2.8.1.1.tar.md5 file according to your device model number.

Step 8. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.

Step 9. Double check everything that we mentioned in Step 7 & Step 8 above. Now, once satisfied hit the START button to begin the flashing process.

Step 10. Once flashing completed, your Galaxy Tab 2 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Download here

Odin - http://bit.ly/1LTGGyv

P3110 - http://bit.ly/1LTHq6M
P3100 - http://bit.ly/1LTGAqG

Congratulation, You are done. We hope you like our tutorials. You can also check out How To Install Android 5.1 on Galaxy Tab 2.